Mask with exaggerated features.
Mask making for theater, film or costume play is fairly simple to perform at home. The process involves the application of techniques used in traditional art, and differs only in the casting medium. The mold-making process differs not at all from mold making for traditional sculpture. You can make a mold for any type of mask you would like, from a full-face monster mask to a partial character mask that changes only certain features.
Instructions
1. Set up a head armature or lifecast that is large enough to fit the person for whom you are making the mask. Cover the structure with a plastic bag to protect it from the clay.
2. Cover the face of the head armature with a thin layer of plasticine clay. Cover a little more than the mask area, so that the armature will be protected during the molding process.
3. Layer clay onto the face areas you would like to build up for the mask. Form the clay into the basic shapes you need with your hands.
4. Sculpt the clay into the mask design you would like, using your sculpting tools. Add and remove clay as necessary.
5. Coat the entire clay design with Krylon Crystal Clear sealer spray. This will protect the clay surface during molding. Let the spray dry.
6. Pour a small amount of gypsum powder into a bucket. Add water until you have created a thick plaster soup. Stir well with a wooden dowel or other stirring tool.
7. Paint one layer of the plaster directly onto the clay mask design, covering only the clay areas of the armature. Make sure to get the plaster into all the nooks and crannies in your design.
8. Let the plaster layer dry for one hour, or until it is dry to the touch. In the meantime, cut your burlap into small strips with a pair of scissors.
9. Make another small plaster mixture. Paint another layer of plaster onto the mask design, then press a few burlap strips into the plaster. The burlap will make the mold structure stronger.
10. Paint over the burlap with plaster. Let the plaster dry.
11. Make another small plaster mixture. Paint a layer of plaster over the mask design and press more burlap strips into it. Layer plaster over the burlap.
12. Let the mold cure, or harden completely, for a full day.
13. Pull the plaster mold away from the armature, breaking the clay design. Pull all clay pieces out of the mold. If necessary, clean the inside of the mold with a small amount of water. Let the mold dry again if you use water.
Related posts
Basic domino maskBasic liquid latex masks are fairly simple to make. Liquid latex is easier to work with than the more realistic-looking foam latex, and requires only a small amount of preparation...
Fiberglass, although a fairly toxic substance, is a common choice among professionals, students and hobbyists for creating props and other art projects. In order to form fiberglass into the desire...
Creating identical copies of existing objects or parts is a professional-level task, but can also be done at home by any beginner. This process is called casting, and consists of pouring a materia...
Making a cast of a mermaid tail sculpture starts with making a mold, or negative, of the sculpture. The most common type of mold is made from plaster, a mixture of gypsum and water. This type of m...
Fiberglass is a common casting material, often used to make exact backup copies of props in stage and film, since a prop can be easily damaged. The best material for a casting fiberglass from a ne...
