Steel studs are light and useful for many construction projects.
Steel studs are beneficial for building ceilings because they are straight, light and can be purchased in longer lengths than wood studs. For low clearance areas, they also come in 1 5/8 inch widths. In many applications, installing a steel stud ceiling take less time and effort than it would with wood studs. Many people shy away from steel studs because they are unfamiliar with them. After you learn frame with steel studs, incorporating them into your other construction projects becomes easier.
Instructions
1. A 4-foot or 6-foot level is used to mark the ceiling height.
Mark a level line around the room at the desired height to install the ceiling. A laser level works best, but a 4-foot level will get the job done.
2. Pan head screws are used to attach the track to the studs.
Screw a track on the longest wall with 1/2-inch pan head screws and then screw another track on the opposite wall. Track is used as a channel to hold the studs. If your walls are made of wood, then use 1 1/4 inch drywall screws to attach the track to the studs.
3. A fine-point maker works best for marking stud locations.
With a permanent marker, layout the studs for the ceiling every 16 inches. Normally, the center of the studs are marked, but you can mark the sides also.
4. A tin snip cuts most studs, but a metal chop box works better when many studs must be cut at one time.
Cut the studs with a tin snips or metal chop box half an inch shorter than the distance between the tracks to allow for irregularities in the walls. If you are using a metal chop box, up to 10 studs or tracks can be cut at one time.
5. Insert the studs into the tracks (called stuffing the studs) and attach the steel studs to the tracks with one 1/2-inch pan head screw on the ends. Use a locking C-clamp to hold the stud to the track during this process.
Related posts
Contact a lumber yard or hardware store to find sheathing in your area.Sheathing is a form of structural reinforcement that appears in homes in many areas. Wall sheathing consists of large pieces...
The finished product of drywall over steel is identical to drywall over wood.Drywall installation is a two-step process: mounting the boards to the wall and applying a drywall compound to the seam...
Runners and metal studs must be securely attached to support the drywall.The key components of a metal framed wall are the runners and the metal studs. Each component needs to be secured to the ce...
Work With Metal StudsMost of the time we think of wood when speaking of construction, probably because most buildings are made from wood. But some buildings are actually constructed primarily from...
Quality lumber is an essential part of completing a bulkhead.Bulkheads are typically used in construction to divide one ceiling from another. Usually, the ceilings have differing heights, but bulk...
