Plaster of Paris is a form of gypsum. The first uses of plaster date back at least 9,000 years to Anatolia (present-day Turkey) and Syria. The Egyptians used it 5,000 years ago as a mortar for monuments such as Cheops pyramid. They also used it to make models taken directly from the human body. In the 1700s, the walls of the wooden houses of Paris were covered with plaster as a way to protect against fire; hence, the name plaster of Paris. Today plaster of Paris has many uses in industry and architecture. It is a versatile, inexpensive, easy-to-use craft material most often used for making casts from molds.
Instructions
1. Spray your mold with an appropriate release material so that you can get your cast out of the mold without breaking it. Molds for plaster of Paris can be made of latex rubber, alginate, plaster, moulage, urethane rubber, silicone rubber, plastic, waxed cardboard, or a wide range of other materials.
2. Measure then pour your water into a plastic container such as a mixing bowl or food storage container. The proportion of water to plaster of Paris is 1 to 2, or one part water to 2 parts plaster of Paris. To make a figurine about 5 inches high, you would need approximately 1/2 cup of water and 1 cup of plaster of Paris.
3. Measure the amount of plaster of Paris you need and use a spoon to scoop it up and sprinkle it on the water. Sprinkle slowly so the water has time to absorb the plaster of Paris as you go.
4. Let the mixture rest for 2 or 3 minutes, then mix it slowly and gently with the paddle or spoon. The reason for mixing it slowly is to get as few air bubbles as possible in the mixture. The mixture should end up being the consistency of cake batter. If it is not, add a little more plaster of Paris or a little more water.
5. Tap the container several times to get the air bubbles to rise to the surface.
6. Pour the plaster of Paris slowly into your mold. Fill the mold just a little over full.
7. Let the plaster of Paris set in the mold. First it will get very hot, then it will begin to cool off. When the cast is cool, remove it very carefully from the mold. The cast is still soft at this point, so you can easily repair any little blemishes that have resulted from the casting process.
8. Wait two or three days for the cast to cure before you paint it.
Related posts
Plaster of Paris is used to make casts for broken limbs.Named after a large gypsum deposit in Paris, plaster of Paris is a powdery white substance that hardens when mixed with water and left to dr...
Plaster of Paris is used to make molds and shapes.Plaster of Paris is used to make a variety of different shapes and molds. At home, it is often used to make hand casts and other simple molds. Chi...
Make your own sidewalk chalk out of plaster of Paris.Plaster of Paris, also known as gypsum plaster, is a material used for building and other purposes. It's made by heating gypsum to around 300 d...
Fish can be cast with plaster of Paris.You can make a replica of your prize fish by using plaster of Paris to capture its details. With a clay mold, the image of your fish will be incised for plas...
Use a candy mold to craft with Plaster of Paris.Plaster of Paris is made from gypsum rock that changes from a solid form into a powder and back to a solid quite easily by adding water. It is a pop...
